Quick Network Reference
Common CIDR sizes and usable host counts. View full cheat sheet. Note: /31 uses both addresses per RFC 3021 (point-to-point links), and /32 is a single host.
/30
2
Point-to-point links
/29
6
Small subnets
/28
14
Small VLANs
/27
30
Departments
/26
62
Medium VLANs
/25
126
Large VLANs
/24
254
Standard subnet
/23
510
Large segments
/22
1022
Very large segments
Popular Tools
View all toolsSubnet Calculator
Calculate IPv4 network addresses, broadcast addresses, subnet masks, CIDR ranges, wildcard masks, and usable hosts.
IP & SubnettingCIDR Calculator
Convert CIDR notation to subnet masks, wildcard masks, and calculate usable IP ranges with an interactive slider.
IP & SubnettingVLSM Calculator & Subnet Planner
Plan VLSM subnets from a parent network. Enter multiple host requirements and automatically allocate non-overlapping, right-sized subnets with largest-first allocation, address-space visualization, CSV export, and print.
IP & SubnettingPoE Budget Calculator
Calculate total PoE power consumption, remaining budget, utilization, and maximum devices for 802.3af/at/bt switches.
SwitchingMTU Overhead Calculator
Calculate effective payload MTU and recommended TCP MSS after accounting for encapsulation overhead from VLANs, GRE, IPsec, VXLAN, and more.
Network PerformanceRack Power Calculator
Calculate rack power consumption, amperage at 120V/208V, monthly kWh, and electricity cost for datacenter equipment.
InfrastructureTool Categories
IP & Subnetting
IPv4 and IPv6 subnet calculators, CIDR tools, wildcard masks, DHCP scope planning, and IP address analysis.
Switching
VLAN planning, switch port capacity, PoE budgeting, and switching infrastructure tools.
Network Performance
MTU analysis, TCP throughput, bandwidth, and file transfer time calculators for network performance tuning.
Wireless
WiFi channel planning, bandwidth estimation, access point capacity, and wireless coverage tools.
Infrastructure
Rack power, UPS runtime, server power, datacenter cooling, and fiber loss calculators for physical infrastructure.
Generators
Cisco IOS configuration generators and access list builders for VLANs, DHCP, interfaces, and ACLs.
Recently Added Tools
Cisco Configuration Validator
Paste a Cisco IOS or IOS XE configuration and get structured findings for interface conflicts, EtherChannel and VLAN problems, duplicate SVI addresses, and disruptive commands. Runs entirely in your browser.
GeneratorsVLSM Calculator & Subnet Planner
Plan VLSM subnets from a parent network. Enter multiple host requirements and automatically allocate non-overlapping, right-sized subnets with largest-first allocation, address-space visualization, CSV export, and print.
IP & SubnettingIP Subnet Overlap Checker
Detect overlapping, duplicate, and contained IPv4 subnets. Paste multiple CIDR networks to identify every conflicting pair with clear explanations and CSV export.
IP & SubnettingRoute Summarization Calculator
Calculate the smallest CIDR summary or supernet for multiple IPv4 networks. Warns when the summary includes extra addresses and provides a more precise minimal CIDR set.
IP & SubnettingCisco Switchport & Trunk Config Generator
Generate Cisco IOS and IOS XE switchport configuration for access ports, standalone trunks, Port-channel interfaces, and EtherChannel members, with interface range grouping and copy or download output.
GeneratorsSubnet Calculator
Calculate IPv4 network addresses, broadcast addresses, subnet masks, CIDR ranges, wildcard masks, and usable hosts.
IP & SubnettingGuides & References
View all guidesIPv4 Subnetting Guide
A complete walkthrough of IPv4 subnetting: network vs host bits, CIDR notation, calculating network addresses, broadcast addresses, and usable hosts with worked examples.
CIDR Explained
What CIDR notation is, how it replaced classful addressing, and how to read and use slash notation like /24, /23, and /30 in real network configurations.
/24 vs /23: What's the Difference?
A practical comparison of /24 and /23 subnets — address counts, usable hosts, when to use each, and the trade-offs of larger broadcast domains.
How Many Hosts Are in a /24?
The definitive answer to how many usable hosts fit in a /24 subnet, with the math explained and edge cases like /31 and /32 covered.
CIDR Cheat Sheet
Complete CIDR reference table from /0 to /32 with subnet masks, wildcard masks, total addresses, and usable hosts.
TCP/UDP Port Reference
Common TCP and UDP port numbers for network protocols including HTTP, HTTPS, DNS, DHCP, SMTP, SSH, SNMP, and more.
Ethernet Speed Reference
Ethernet standards from 10 Mbps to 400 Gbps including cable types, distances, connectors, and IEEE designations.
About NetworkToolsHub
NetworkToolsHub is built and technically reviewed by an experienced enterprise network engineer with 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations. Every calculator runs entirely in your browser — no data is sent to any server, and no account is required. The site covers IP subnetting, switching, network performance, wireless planning, infrastructure sizing, and Cisco configuration generation.
Each tool includes educational content explaining the calculations, common use cases, and important considerations for real-world deployment. Calculations use standards-based formulas (RFC 1918, RFC 3021, IEEE 802.3) and are verified against known reference values.
Practical tools for real network engineers.
Frequently Asked Questions
Are NetworkToolsHub calculators free to use?
Yes, all calculators and tools on NetworkToolsHub are completely free. There are no accounts, subscriptions, or hidden fees. Every tool runs entirely in your browser.
Do I need to create an account?
No. NetworkToolsHub does not require user accounts. All tools are available without registration or login.
Are the calculations performed locally or sent to a server?
All calculations run locally in your browser. No data is sent to any backend server. This includes configuration generators — your input never leaves your device.
Can I use these tools for production network planning?
Yes, but always validate calculations and generated configurations against your equipment, software version, vendor documentation, and production requirements before implementation. The tools provide accurate estimates, but real-world environments may have vendor-specific variations.
Who builds and reviews the calculators?
NetworkToolsHub is built and technically reviewed by an experienced enterprise network engineer with 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations. Each calculator is checked against known reference values and standards-based formulas.