VLSM Calculator & Subnet Planner
Plan VLSM subnets from a parent network. Enter multiple host requirements and automatically allocate non-overlapping, right-sized subnets with largest-first allocation, address-space visualization, CSV export, and print.
VLSM Calculator & Subnet Planner
Network Requirements
Enter a name and host count for each network. Subnets are allocated largest-first to minimize fragmentation.
Parent Network
10.20.0.0/16
Allocated
1,248
Remaining
64,288
Utilization
2%
Address Space Visualization
Each colored block represents an allocated subnet within the parent address space.
| Name | Req. Hosts | Network | Mask | Wildcard | First Host | Last Host | Broadcast | Usable | Unused | Util % |
|---|---|---|---|---|---|---|---|---|---|---|
| Users | 500 | 10.20.0.0/23 | 255.255.254.0 | 0.0.1.255 | 10.20.0.1 | 10.20.1.254 | 10.20.1.255 | 510 | 10 | 98% |
| Voice | 250 | 10.20.2.0/24 | 255.255.255.0 | 0.0.0.255 | 10.20.2.1 | 10.20.2.254 | 10.20.2.255 | 254 | 4 | 98% |
| Wireless | 200 | 10.20.3.0/24 | 255.255.255.0 | 0.0.0.255 | 10.20.3.1 | 10.20.3.254 | 10.20.3.255 | 254 | 54 | 79% |
| Cameras | 100 | 10.20.4.0/25 | 255.255.255.128 | 0.0.0.127 | 10.20.4.1 | 10.20.4.126 | 10.20.4.127 | 126 | 26 | 79% |
| Servers | 50 | 10.20.4.128/26 | 255.255.255.192 | 0.0.0.63 | 10.20.4.129 | 10.20.4.190 | 10.20.4.191 | 62 | 12 | 81% |
| Management | 25 | 10.20.4.192/27 | 255.255.255.224 | 0.0.0.31 | 10.20.4.193 | 10.20.4.222 | 10.20.4.223 | 30 | 5 | 83% |
What is VLSM?
Variable Length Subnet Masking (VLSM) is the practice of dividing a parent network into subnets of different sizes, each sized to the actual host requirement it must serve. Unlike fixed-length subnetting — where every subnet in a network uses the same prefix length — VLSM lets you allocate a /27 for a small management VLAN, a /24 for a larger user VLAN, and a /23 for a large wireless segment, all from the same parent block.
Why Largest-First Allocation?
This calculator allocates subnets largest-requirement-first. Sorting by descending host count ensures that the largest blocks are placed before smaller ones, which minimizes address fragmentation. If a small subnet were allocated first, it could split the address space at a boundary that prevents a larger block from fitting later. By placing the largest blocks first, each subsequent allocation can use the next available aligned space.
VLSM vs. Fixed-Length Subnetting
With fixed-length subnetting, every subnet uses the same prefix. If your largest VLAN needs 500 hosts, you would use a /23 for every subnet — wasting hundreds of addresses on small segments that only need a handful of hosts. VLSM eliminates this waste by matching each subnet's prefix to its actual requirement.
Enterprise Example
Consider a branch office with the parent network 10.20.0.0/16. The network engineer needs subnets for Users (500 hosts), Voice (250), Wireless (200), Cameras (100), Servers (50), and Management (25). Using VLSM with largest-first allocation:
- Users (500) → /23 (510 usable) — 10.20.0.0/23
- Voice (250) → /24 (254 usable) — 10.20.2.0/24
- Wireless (200) → /24 (254 usable) — 10.20.3.0/24
- Cameras (100) → /25 (126 usable) — 10.20.4.0/25
- Servers (50) → /26 (62 usable) — 10.20.4.128/26
- Management (25) → /27 (30 usable) — 10.20.4.192/27
The entire plan consumes only 10.20.0.0 through 10.20.4.223 — a fraction of the /16, leaving the rest available for future growth.
Common VLSM Mistakes
- Not sorting by size: Allocating small subnets first can fragment the address space so that larger blocks no longer fit.
- Forgetting alignment: Every subnet must start at a boundary aligned to its prefix length. A /25 must start at a .0 or .128 boundary, not at an arbitrary address.
- Not reserving growth room: Allocate 20-50% more than current need to avoid renumbering later.
- Mixing /31 and LAN subnets: /31 is for point-to-point links only (RFC 3021), not for multi-access LAN segments.
Technical References
Related Tools
- Subnet Calculator — single-subnet calculation with splitting and host sizing
- DHCP Scope Calculator — plan DHCP pools within your VLSM subnets
- VLAN Sizing Calculator — right-size VLAN subnets with growth planning
- Wildcard Mask Calculator — inverse masks for ACLs and OSPF
- Subnet Overlap Checker — verify your VLSM plan has no overlaps
- Route Summarization Calculator — summarize your VLSM subnets into aggregate routes
- Cisco VLAN Config Generator — turn VLSM subnets into VLAN and SVI configuration templates
- Cisco Switchport & Trunk Generator — assign those VLANs to access ports, trunks, and EtherChannel links
- Cisco Configuration Validator — check the finished configuration for conflicts
Guides
Frequently Asked Questions
What is VLSM and how does it differ from fixed-length subnetting?
VLSM (Variable Length Subnet Masking) allows you to divide a parent network into subnets of different sizes, each matched to its host requirement. Fixed-length subnetting uses the same prefix length for every subnet, which wastes addresses on small segments. VLSM allocates a /27 for 25 hosts and a /23 for 500 hosts from the same parent block, minimizing waste.
Why does the calculator sort requirements largest-first?
Allocating the largest subnets first minimizes address fragmentation. If a small subnet is placed first, it can split the address space at a boundary that prevents a larger block from fitting later. By placing the largest blocks first, each subsequent allocation can use the next available aligned space.
How are /31 and /32 handled in VLSM planning?
/31 follows RFC 3021 for point-to-point links with 2 usable addresses and no broadcast. /32 is a single host address. Both are supported in the allocation, but they are not general-purpose LAN subnets — /31 is for router-to-router links and /32 is for loopbacks or host routes.
What happens if my requirements don't fit in the parent network?
The calculator detects when the remaining requirements cannot fit within the parent address range and displays a clear error. It also recommends the minimum parent prefix (e.g., /14 instead of /16) that would be needed to fit all requested subnets.
Can I export the VLSM plan?
Yes. You can copy the plan as text, export it as CSV (compatible with Excel and Google Sheets), or print it directly from your browser. All calculations run client-side — no network information is sent to a server.
Technically Reviewed By
Senior Enterprise Network Engineer — 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations.
Last reviewed: 2026-09-04
Calculations are performed using standards-based formulas and verified against known reference values. All computation runs client-side in your browser.
Related Resources
Subnet Calculator
Calculate IPv4 network addresses, broadcast addresses, subnet masks, CIDR ranges, wildcard masks, and usable hosts.
DHCP Scope Calculator
Calculate DHCP scope ranges, available addresses, exclusions, reservations, and utilization for IPv4 networks.
VLAN Sizing Calculator
Determine the right subnet size for a VLAN based on current clients, growth percentage, and reserved infrastructure addresses.
Wildcard Mask Calculator
Convert subnet masks to wildcard masks and inverse masks for ACLs, OSPF, and Cisco access list configuration.
IP Subnet Overlap Checker
Detect overlapping, duplicate, and contained IPv4 subnets. Paste multiple CIDR networks to identify every conflicting pair with clear explanations and CSV export.
Route Summarization Calculator
Calculate the smallest CIDR summary or supernet for multiple IPv4 networks. Warns when the summary includes extra addresses and provides a more precise minimal CIDR set.
VLSM Explained
Variable Length Subnet Masking (VLSM) explained with step-by-step examples: how to split a network into differently sized subnets for efficient address allocation.
IPv4 Subnetting Guide
A complete walkthrough of IPv4 subnetting: network vs host bits, CIDR notation, calculating network addresses, broadcast addresses, and usable hosts with worked examples.
How to Choose a Subnet Size
Practical guidance on selecting the right CIDR prefix for a VLAN or network segment based on host count, growth, broadcast domain size, and operational needs.
RFC 1918 Private IP Address Ranges
The three private IP ranges defined by RFC 1918, how to use them, and why they matter for internal network design and NAT.