Wi-Fi Standards Reference

IEEE 802.11 standards from the original 802.11 to Wi-Fi 7 (802.11be), including the Wi-Fi Alliance generation name, frequency band, maximum data rate, channel width, and modulation scheme.

Built by a network engineerCalculations run locally in your browserNo signup requiredNetwork information is not transmitted to our servers

802.11 Standards

Maximum data rates are theoretical PHY-layer peaks under ideal conditions (highest channel width, shortest guard interval, maximum spatial streams). Real-world throughput is typically 50–70% of the PHY rate due to MAC overhead, contention, and distance.

StandardNameYearBandMax RateChannel WidthModulation
802.11—19972.4 GHz2 Mbps20 MHzDSSS, FHSS
802.11bWi-Fi 119992.4 GHz11 Mbps20 MHzDSSS / CCK
802.11aWi-Fi 219995 GHz54 Mbps20 MHzOFDM (64-QAM)
802.11gWi-Fi 320032.4 GHz54 Mbps20 MHzOFDM (64-QAM)
802.11nWi-Fi 420092.4 / 5 GHz600 Mbps (4×4)20 / 40 MHzOFDM, 64-QAM, MIMO
802.11acWi-Fi 520145 GHz3.5 Gbps (8×8)20 / 40 / 80 / 160 MHzOFDM, 256-QAM, MU-MIMO (DL)
802.11axWi-Fi 6 / 6E2019 / 20212.4 / 5 / 6 GHz (6E)9.6 Gbps20 / 40 / 80 / 160 MHzOFDMA, 1024-QAM, MU-MIMO (UL/DL)
802.11beWi-Fi 720242.4 / 5 / 6 GHz46 GbpsUp to 320 MHzOFDMA, 4096-QAM, MLO

Channel Widths & Availability

BandChannel WidthNotes
2.4 GHz20 MHz1–13 (EU), 1–11 (US). Only 1, 6, 11 are non-overlapping.
5 GHz20 MHzUp to 25 channels (UNII-1/2/3), subject to DFS and regional rules.
5 GHz40 MHzHalf as many as 20 MHz; uses bonded pairs.
5 GHz80 MHzQuarter as many; e.g., 36+40+44+48.
5 GHz160 MHzFew channels; e.g., 36–64, 100–128.
6 GHz (Wi-Fi 6E/7)20–320 MHzUp to 59 × 20 MHz channels; 7 × 160 MHz; 3 × 320 MHz.

Key Technologies

  • MIMO (802.11n) — multiple spatial streams increase throughput using multiple antennas.
  • MU-MIMO (802.11ac downlink, 802.11ax uplink+downlink) — serves multiple clients simultaneously.
  • OFDMA (802.11ax) — splits a channel into sub-channels (RUs) so multiple clients share airtime efficiently.
  • 1024-QAM (802.11ax) — packs more bits per symbol than 256-QAM, boosting peak rate ~25%.
  • 4096-QAM (802.11be) — further increases spectral efficiency.
  • MLO (802.11be) — Multi-Link Operation aggregates 2.4/5/6 GHz simultaneously for higher throughput and lower latency.

Related Tools

Technically Reviewed By

Senior Enterprise Network Engineer — 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations.

Last reviewed: 2026-09-02

Calculations are performed using standards-based formulas and verified against known reference values. All computation runs client-side in your browser.