PoE Standards Reference
IEEE 802.3af, 802.3at, and 802.3bt Power over Ethernet standards. The table shows the power sourcing equipment (PSE) output, the powered device (PD) input after cable loss, the maximum current per pair, and the minimum cable grade.
PoE Types (PSE → PD)
PSE output is the power the switch or injector delivers at its port. PD input is the guaranteed power available to the device after worst-case cable loss (100 m of cable). The difference is dissipated as heat in the cable.
| Standard | Name | Type | PSE Output | PD Input | Max Current | Min Cable |
|---|---|---|---|---|---|---|
| 802.3af | PoE | Type 1 | 15.4 W | 12.95 W | 350 mA | Cat5e+ |
| 802.3at | PoE+ | Type 2 | 30 W | 25.5 W | 600 mA | Cat5e+ |
| 802.3bt (Type 3) | PoE++ | Type 3 | 60 W | 51 W | 960 mA | Cat5e+ |
| 802.3bt (Type 4) | PoE++ | Type 4 | 90 W | 71.3 W | 960 mA | Cat5e+ |
PoE Classification
Classification lets the PSE negotiate the right amount of power. Physical-layer classification uses a signature resistance; data-layer (LLDP) classification allows dynamic allocation. Classes 5–8 are defined in 802.3bt.
| Class | Standard | PSE Min | PSE Max | PD Min | PD Max |
|---|---|---|---|---|---|
| 0 | 802.3af | 15.4 W | 15.4 W | 0.44 W | 12.95 W |
| 1 | 802.3af | 4.0 W | 4.0 W | 0.44 W | 3.84 W |
| 2 | 802.3af | 7.0 W | 7.0 W | 3.84 W | 6.49 W |
| 3 | 802.3af | 15.4 W | 15.4 W | 6.49 W | 12.95 W |
| 4 | 802.3at | 30 W | 30 W | 12.95 W | 25.5 W |
| 5 | 802.3bt | 45 W | 45 W | 40 W | 40 W |
| 6 | 802.3bt | 60 W | 60 W | 51 W | 51 W |
| 7 | 802.3bt | 75 W | 75 W | 60 W | 60 W |
| 8 | 802.3bt | 90 W | 90 W | 71 W | 71.3 W |
Pair Usage
- 802.3af / 802.3at (Type 1 & 2): power delivered over 2 pairs (either 1/2 & 3/6 or 4/5 & 7/8). Mode A uses data pairs; Mode B uses spare pairs.
- 802.3bt (Type 3 & 4): power delivered over all 4 pairs simultaneously, increasing available power and improving efficiency.
Related Tools
- PoE Budget Calculator — verify a switch power budget against connected PD loads.
- Switch Port Capacity Calculator — plan switch port and power requirements.
Technically Reviewed By
Senior Enterprise Network Engineer — 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations.
Last reviewed: 2026-09-02
Calculations are performed using standards-based formulas and verified against known reference values. All computation runs client-side in your browser.