IPv6 Address Types Reference
IPv6 address types, prefix lengths, scopes, and special addresses. Covers global unicast, unique local, link-local, loopback, unspecified, multicast, and anycast, plus the multicast scope field values defined in RFC 4291.
IPv6 Address Types
IPv6 has no broadcast. Multicast replaces broadcast, and anycast reuses unicast addresses that are assigned to multiple nodes. The Interface ID is 64 bits for most unicast addresses, often derived via Modified EUI-64 or privacy extensions.
| Type | Prefix | Prefix Length | Scope | Example |
|---|---|---|---|---|
| Global Unicast (GUA) | 2000::/3 | /3 (range 2000:: – 3fff::) | Global (routable on internet) | 2001:db8:abcd:12::1/64 |
| Unique Local Unicast (ULA) | fc00::/7 | /7 (fd00::/8 used in practice) | Site / private (not routed on internet) | fd12:3456:789a::1/64 |
| Link-Local Unicast | fe80::/10 | /10 (fe80::/64 typical) | Link-local (single segment only) | fe80::1ff:fe23:4567:890a |
| Loopback | ::1/128 | /128 | Host-local | ::1 |
| Unspecified | ::/128 | /128 | Host-local (no address) | :: |
| IPv4-Mapped | ::ffff:0:0/96 | /96 | Host-local (IPv4 in IPv6) | ::ffff:192.0.2.1 |
| Multicast | ff00::/8 | /8 | Varies by scope field | ff02::1 (all nodes, link-local) |
| Anycast | (from unicast range) | Same as unicast | Global or site | 2001:db8:: (shared by multiple hosts) |
Common Multicast Addresses
Multicast addresses start with ff. The second nibble is the scope (see the next table). Solicited-node multicast (ff02::1:ff00:0/104) is used by Neighbor Discovery Protocol (NDP) to replace ARP.
| Address | Scope | Group |
|---|---|---|
| ff01::1 | Interface-local | All nodes |
| ff02::1 | Link-local | All nodes |
| ff02::2 | Link-local | All routers |
| ff02::5 | Link-local | OSPFv3 AllSPFRouters |
| ff02::6 | Link-local | OSPFv3 AllDRouters |
| ff02::9 | Link-local | RIPng routers |
| ff02::1:2 | Link-local | All DHCP relay agents and servers |
| ff02::1:ff00:0/104 | Link-local | Solicited-node multicast (NDP) |
| ff05::2 | Site-local | All routers (site) |
| ff0e::/16 | Global | Global scope multicast |
Multicast Scope Field (2nd nibble of ff00::/8)
| Value | Scope |
|---|---|
| 0 | Reserved |
| 1 | Interface-local |
| 2 | Link-local |
| 3 | Realm-local |
| 4 | Admin-local |
| 5 | Site-local |
| 8 | Organization-local |
| E | Global |
| F | Reserved |
Notes
- Link-local (fe80::/10): every IPv6 interface auto-configures a link-local address. It is required for NDP and is only valid on the local segment — routers never forward it.
- Unique Local (fc00::/7): the IPv6 equivalent of RFC 1918. The ULA registry (
fd00::/8) is used for locally assigned prefixes;fc00::/8is reserved for a future allocation registry. - Global Unicast (2000::/3): the first three high-order bits are
001, giving the range2000::through3fff::. The IANA documentation prefix is2001:db8::/32. - Modified EUI-64: the Interface ID is formed by inserting
ff:fein the middle of the MAC address and flipping the U/L bit. This is why link-local addresses often look likefe80::1ff:fe23:....
Related Tools
- IPv6 Prefix Calculator — expand and split IPv6 prefixes.
- IPv6 Subnet Calculator — subnet an IPv6 /48 or /64 block.
- Private IP Ranges Reference — the IPv4 equivalents (RFC 1918, loopback, link-local).
Technically Reviewed By
Senior Enterprise Network Engineer — 25+ years of IT and network infrastructure experience, including enterprise Cisco switching, routing, wireless, firewalls, VPN, network access control, SD-WAN, and large-scale network operations.
Last reviewed: 2026-09-02
Calculations are performed using standards-based formulas and verified against known reference values. All computation runs client-side in your browser.